Month: September 2026
Using the Commissioning Record
Record what was measured after installation, including the measurement path, reference plane, frequency, conditions, equipment, and criterion used. Building a record documents observations; it does not certify that an installation is acceptable….
Using Channel Change Comparison
Paste the current channel plan and the proposed plan to see structural changes and screen each plan for frequency coincidences. A screening hit is something to assess, not a signal level or isolation requirement; a clean screen is not desense clearance….
Using the Antenna Pattern Generator
Enter the antenna’s published specifications to create a synthesized 3D pattern and its 2D plots. Check each value against the source datasheet before building; generated curves are model output, not measured antenna data….
Using the 3D Pattern Viewer
Open a product’s 3D radiation-pattern viewer and inspect the pattern assigned to that antenna. Check the pattern’s status and provenance note first: a synthesized pattern is a model based on published specifications, not a measurement….
Creating a 2D/3D Antenna Pattern
The 2D/3D Antenna Pattern Generator builds a synthesized pattern from antenna specifications entered from a datasheet. One model supplies the 3D view…
Finding and Reopening My Results
Find calculator results you saved or sent, then reopen them in the calculator that created them. Saved results are private; sent results remain associated with their engineering request….
Using Antenna Selection
Filter catalogue antennas by operating frequency, coverage type, gain, and sector beamwidth, then compare the candidates and their pattern status. Treat results as candidates for discussion; frequency matching and synthesized patterns do not establish site suitability or measured performance….
Building a Commissioning Record
The Commissioning Record organizes measurements taken after installation with the context needed to interpret them: where each measurement was taken, what equipment…
Comparing a Channel Plan Change
Channel Change Comparison shows what changes between an existing channel plan and a proposed plan, then screens both plans for frequency coincidences…
Viewing Antenna Patterns in 3D
The 3D Pattern Viewer displays antenna radiation-pattern data as an interactive model. It can help you inspect pattern shape and compare files…